LEXIVON [4-Pack] 16Ft/5m DuaLock Tape Measure | 1-Inch Wide Blade With Nylon Coating, Matte Finish White & Yellow Dual Sided Rule Print | Ft/Inch/Fractions/Metric (LX-207X4)

Choose LX-207 when the longest contact span fits within 16 ft / 5 m. It keeps the 1-inch blade width of the longer LX-206 while offering a shorter measuring range.

For an opening within its 16 ft / 5 m range, push the movable hook against the inside edge and read the desired scale. The hook's movement is part of that measuring method.

Yes. LX-207 reaches 16 ft / 5 m with a 1-inch blade; LX-200 reaches 10 ft / 3 m with a 3/4-inch blade.

The tool has white and yellow scale faces and a multi-catch hook. Use the face that puts the required imperial or metric graduations in view.

No. The blade range ends at 16 ft / 5 m. LX-206 offers a longer 25 ft / 7.5 m contact tape; do not extrapolate beyond LX-207's scale.

Blade width alone does not establish a tested vertical reach. Support LX-207 as needed when measuring upward or across a longer gap.

Set the thumb slider after extending the blade to the measurement. The bottom speed brake is available for controlled withdrawal after you release that slider.

Automatic holding is the AutoLock design, not the DuaLock design. Use LX-207's thumb slider for a held measurement and maintain control during extension.

Yes. LX-207 retains printed fractional graphics alongside feet/inch and metric markings; the shorter length does not remove those scale types.

The housing is rubberized ABS, the 1-inch blade is nylon-coated steel and the spring is described as heat-treated manganese. These materials do not establish a drop-test rating.

It has dual-sided imperial and metric markings on a nylon-coated blade with a matte finish. Choose the face and units that suit your measurement.

The blade has 16-inch center references for framing layouts. Use them within the blade range and confirm the planned spacing before making marks.

LX-207X4 supplies 4 tapes; LX-207 supplies one. Each pack member uses the same base-model blade length, width and locking mechanism.

No. LX-208 supplies two 16 ft / 5 m DuaLock tapes. LX-207 supplies one; the pack does not turn either blade into a 32-foot tape.

4 16 ft / 5 m DuaLock tape measures, each with a belt clip and wrist strap.

Yes. This pack supplies 4 copies of the same LX-207 tape model.

It uses a spring-driven contact blade and mechanical controls. It has no electrical distance display; LX-201 adds a laser meter to a 16 ft / 5 m tape.

Lifetime coverage when you register online within 90 days of purchase; 12 months standard without registration. Coverage does not include normal wear or misuse; commercial use is 12 months without extension and industrial use is excluded.

It is a movable true-zero hook for inside and outside measurements. Intended movement alone does not establish damage; contact Lexivon about a bent hook or loose assembly.

After recording your LX-207 reading, release the sliding lock. Use the bottom speed brake to manage the returning blade while keeping it controlled.

Check that you are using the correct lock control. If the blade still slips, stop relying on the held reading and contact Lexivon.

Stop relying on readings from a damaged blade and contact Lexivon about next steps. Do not assume straightening a damaged blade restores measurement accuracy.

Cross-brand replacement fit is not verified. Ask Lexivon for confirmed parts; the policy excludes damage from non-original parts and tool modifications.

No. Warranty coverage excludes normal wear and tear, accidents, misuse, modifications and damage from non-original parts. Warranty resolution for covered defects is at Lexivon's discretion and coverage is not transferable.