[3-Pack] 10Ft/3m DuaLock Tape Measure | 3/4-Inch Wide Blade With Nylon Coating, Matte Finish White & Yellow Dual Sided Rule Print | Ft/Inch/Fractions/Metric (LX-203)

Its blade reaches 10 ft / 3 m. Check the longest room dimension first; LX-207 reaches 16 ft / 5 m and LX-206 reaches 25 ft / 7.5 m.

LX-200 pairs a 10 ft / 3 m blade with 3/4-inch width. The 16-foot LX-207 uses a 1-inch blade, so compare both reach and width.

Yes, if the opening is within 10 ft / 3 m. Push the movable hook against the inside surface and read the desired unit scale.

The body measures 3.18 x 2.95 x 1.96 inches in length, width and height order. These are product measurements rather than package dimensions.

Ten feet is its marked measuring length, not a tested vertical reach. Support the 3/4-inch blade where necessary; no ceiling-height guarantee is verified.

The blade includes 16-inch center references. Use those as layout aids within the 10-foot span and check the project plans rather than assuming every wall uses the same spacing.

Use the thumb slider to retain the chosen blade length. The separate underside brake controls the moving blade; it is not the AutoLock mechanism used on LX-205.

Turn the blade to the yellow reverse face for metric and imperial graduations. The white face carries feet, inches and printed fractions.

No. This narrower LX-200 blade is nylon-coated steel. The coating and matte scale faces are separate from the rubberized ABS housing.

One tool weighs 0.36 lb. That figure refers to one tool, not the three-tape LX-203 package.

The steel blade has corrosion protection. Avoid treating the assembled LX-200 as a waterproof instrument.

The multi-catch hook supports either blade orientation. Make sure you are reading the feet/inch or metric scale you intended after turning the blade.

LX-203 supplies 3 tapes; LX-200 supplies one. Each pack member uses the same base-model blade length, width and locking mechanism.

No. LX-203 supplies three copies of the 10 ft / 3 m DuaLock tape; buying the pack changes quantity rather than the length of an individual tape.

3 10 ft / 3 m DuaLock tape measures, each with a belt clip and wrist strap.

Yes. This pack supplies 3 copies of the same LX-200 tape model.

LX-200 has printed blade scales and mechanical locks. Its measuring operation needs no battery or LCD.

Lifetime coverage when you register online within 90 days of purchase; 12 months standard without registration. Commercial use stays at 12 months and industrial use is excluded.

It is a movable true-zero hook for inside and outside measurements. Intended movement alone does not establish damage; contact Lexivon about a bent hook or loose assembly.

After recording your LX-200 reading, release the sliding lock. Use the bottom speed brake to manage the returning blade while keeping it controlled.

Check that you are using the correct lock control. If the blade still slips, stop relying on the held reading and contact Lexivon.

Stop relying on readings from a damaged blade and contact Lexivon about next steps. Do not assume straightening a damaged blade restores measurement accuracy.

Cross-brand replacement fit is not verified. Ask Lexivon for confirmed parts; the policy excludes damage from non-original parts and tool modifications.

No. Warranty coverage excludes normal wear and tear, accidents, misuse, modifications and damage from non-original parts. Warranty resolution for covered defects is at Lexivon's discretion and coverage is not transferable.