Tamper Proof Torx Bit Socket Set, Premium S2 Alloy Steel | 13-Piece Security Star T8 - T60 Set | Enhanced Storage Case (LX-146)

Yes, when the screw uses an included security Torx size from T8H to T60H and the bit can seat fully over the center pin. License-plate hardware may use other profiles, so check the actual screw.

T55H is included on a 3/8-inch square drive. Check the Jeep screw's exact Torx size and center-pin profile, and follow its service procedure; the vehicle name alone does not guarantee fit.

1/4 inch: T8H, T10H, T15H, T20H, T25H, T27H, T30H; 3/8 inch: T40H, T45H, T47H, T50H, T55H; 1/2 inch: T60H.

Yes, for matching security Torx sizes T8H through T60H. The center holes clear the security pin; other security profiles are not included.

Yes. T27H is a 1/4-inch drive piece and T47H is a 3/8-inch drive piece. Both are listed security Torx sizes, although not every intermediate T-number is supplied.

No. T8H through the listed T30H group use 1/4 inch, T40H through T55H use 3/8 inch, and T60H uses 1/2 inch. A buyer with only one ratchet connection must check each group.

The largest LX-146 piece, T60H, needs a 1/2-inch square drive. The next listed size, T55H, remains on 3/8 inch; choose the connection separately from the fastener's T-number.

Use LX-146 with suitable manual torque tools. Confirm an explicit impact rating for the exact security piece and powered tool before impact use; a center hole does not establish that rating.

In the LX-146 inventory, H distinguishes the security Torx version with a center hole. T30H uses a 1/4-inch square drive; the suffix is not a horsepower, hardness or torque rating.

Follow the fastener's service specification and use a suitably rated tool. T40H identifies the security Torx size on a 3/8-inch drive, rather than an allowable torque; confirm a per-size tool limit for the job.

Check that the selected security tip seats fully in the relay-cover screw and that the socket and drive tool clear the surrounding parts. Confirm the required working length for your motorcycle before choosing LX-146.

Keep the case upright and check that the security pieces sit in their marked slots before carrying it. The supplied storage case does not guarantee that pieces will remain secured after a drop or when inverted.

LX-146 has 13 security Torx bits from T8H to T60H with center holes. LX-143 has 13 solid Torx bits from T8 to T60. Choose LX-146 when a matching Torx fastener has a center pin; neither set is a universal security-bit kit.

Both are listed among the thirteen LX-146 security bit sockets. T27H uses 1/4 inch and T40H uses 3/8 inch; the package also includes the carry case, without a ratchet in the published contents.

Lifetime coverage when you register online within 90 days of purchase; 12 months standard without registration. Commercial use has 12 months of coverage and cannot be extended; industrial use is not covered. Coverage is for defects in materials and workmanship, excluding normal wear, misuse, modification and non-original parts.

LX-146 starts at T8H and does not list T5 or T6. LX-301 lists smaller security bits on 1/4-inch hex shanks, with T4 specifically solid; choose its documented size and a suitable hex-bit holder when those smaller sizes are required.

The security Torx bits are not sold individually, and lost bits are not covered by the lifetime warranty. Ask Lexivon about the exact LX-146 H-suffix size and available assistance instead of assuming T45H has a retail ordering code.

Use LX-146 as the model number in place of the missing serial number when completing registration. Keep your proof of purchase; contact Lexivon if the form still will not accept the details. Register within 90 days of purchase for lifetime coverage.

Identify the exact H-size and ensure the center hole clears the screw's pin before applying controlled force. A T30H and a T40H require different recess sizes and different square drives; do not compensate for poor engagement by increasing force.

Stop using the damaged piece and contact Lexivon with the model, issue description and clear photos. A break alone does not establish a covered defect; Lexivon assesses warranty eligibility.

T27H is an expected 1/4-inch drive security piece, so photograph the case and its marked slot and contact Lexivon about that specific missing size. Do not substitute a neighboring Torx size to complete the screw removal.

Set aside the deformed security piece and check that the fastener and center pin are undamaged. Use a replacement with the exact matching profile and size; do not reshape a twisted T27H or rounded T50H to keep working.

No. Use it for fastening with a suitable drive tool. Do not use a socket as a hammer, chisel or for other non-fastening tasks.

No. Coverage excludes normal wear, misuse, modification and damage from non-original parts. Commercial use is limited to 12 months without extension; industrial use is excluded. Torque-wrench recalibration is also excluded.